Aircraft Refuelling Equipment
Hydrant Dispenser
Samudra’s technical and engineering team’s experiences begin with many years of servicing on the ground various operational issues of our customer’s aircraft refuellers and hydrant dispensers. Our long experience in manufacturing and maintenance of petroleum tankers vehicle and technical collaboration with international principal such as Fluid Transfer International (UK), Refuel International (Australia), Proflo Industries (USA) and other technology partners further enhanced our collective expertise to undertake and successfully completed various refurbishment/ rebuild/ rechassis projects with major oil companies and military contractor.
With various partnership and collaboration, we have the know-how to provide, install and commission complete brand new made of aircraft refueller and hydrant dispenser.
Hydrant Dispenser
Description: Hydrant Dispenser
Flow Rate:
3,800 Litre per Minute Deck Hoses
1,000 Litre per Minute Reel Hose
Standard: JIG 1 Issue 12, BS EN12312-5, EI1583 7th edition, EI1581 6th edition, ISO1825
Tanker: UN/ADR build compliance. Material: Aluminium AA 5182 or equivalent
Dimension: Subject to final specifications and chassis selection, the completed vehicle will have the following approximate dimensions and weights:
Length: 8,100 mm
Width: 3,000 mm
Height: 2,600 mm (excluding cab roof beacon)
Weight fully laden: 7,500 kg (subject to final specification)
Filter Water Separator Vessel
100 mm x 11m long ISO1825 HD type C intake hose
100 mm Al.Al light weight intake swivel
High differential pressure shut down system set at 15 psi.
Triple capsule bulk meter
Veeder Root EMR 4 electronic meter register system
Prokosch main isolating / flow control valves
Fully compensating secondary pressure control system
Deck hose supply pantograph
100 litre nominal capacity stainless steel product recovery tank (PRT) equipped with an automated emptying system
4 litre nominal capacity visual check fuel sampler equipped with pneumatically operated SWD system
Two 63 mm x 3.5 m long platform mounted deck hoses conforming to ISO1825 HD type C
One 50 mm x 25m long reel mounted hose conforming to ISO1825 HD type C
Hose end pressure control couplings each equipped with stick handles, 45 psi regulator, 100 mesh screen and 2.5” BSPP quick disconnect coupling
Elevating platform capable of reaching 4.6m from ground level to suit A380 and future B777-900 aircraft. The elevating platform is equipped with two wing contactor wands preventing contact of the platform with the aircraft wing. The wands are configured to operate at a point 300 mm above the highest point on the elevating platform. Access to and from the elevating platform is via a ‘walk up / walk down’ stairway. The platform as standard is equipped with half depth logo panels. The platform standing area is 1,400 mm from ground level when in the lowered position.
The main fuelling pipework is constructed in grade 304L schedule 5 / 10s seamed stainless steel tubing. All bends are of the smooth radius type. All joints are flanged.
All pipework low points equipped with ¾” drain bosses and plugs
All pipework fully back purged with inert gas during the welding process to ensure full root penetration and minimise internal oxidation.
Small bore pipework and systems constructed in stainless steel tubing using stainless steel fittings
Intake hose is stowed around the vehicle on a circular stainless steel lifting rail allowing the hose to be deployed and re-stowed in one operation. The intake hose is equipped with support trolleys allowing the hose to be easily manoeuvred around the apron.